Roughness measurement profile measuring instrument

Measuring principle:

The measuring principle of this instrument is the rectangular coordinate measurement method, that is, the coordinate points of the surface profile of the parts to be measured are mapped through the X axis and Z1 axis sensors, and the coordinate point data measured by the sensor is transmitted to the upper PC through the electrical components. The software performs mathematical operation on the original coordinate data collected, and marks the required engineering measurement items.

The performance of this instrument can be compared with that of imported instruments, and its indicators have reached international standards. The instrument meets the requirements of national standards GB/T3505-2000, GB/T6062-2001, GB/T10610-1998, and international standards ISO5436, ISO11562, ISO4287

Equipment dimensions：

product				packing				Total weight (Wt.kg)	volume （CBM m³）
Lx	Ly	Lz	Wt(kg)	Lx	Ly	Lz	Wt(kg)
1278	698	1640	180	1378	798	1700	50	400	1.39

Measuring range：

X direction		120mm
Z1	Profile measurement range	60mm
	Roughness range	60mm
height		400mm
Minimum inner hole		10mm